Kenwood KM001 Assemble & Disassembling page 6

Spares - KM001/002/003/502/005/006/007/506 Disassembly & re-assembly instructio...
15. HINGE PIN PUSHES OUT IF REQUIRED
(RETAINED BY VENT PANEL IN BODY)
16. RE-ASSEMBLY IS THE REVERSE OF
STEPS 1-14 EXCEPT TAKE CARE THAT THE
POWER SUPPLY CABLE DOES NOT RUB
ON THE FAN
Click here to return to the top of the page.
MOTOR
1. REMOVE TOP COVER
2. REMOVE TOP WASHER
3. REMOVE 3 MOTOR SCREWS (NO.2
POZIDRIVE)
http://www.kenwoodservice.co.uk/product-files-kar/sovereign-tech2.htm
Page 6 of 11
30/04/2009