Kenwood KM001 Assemble & Disassembling page 7

Spares - KM001/002/003/502/005/006/007/506 Disassembly & re-assembly instructio...
4. REMOVE BELT
5. PLACING THE TOP COVER IN POSITION
AT THIS STAGE STABILIZES THE
APPLIANCE WHEN INVERTED
6. STRIP DOWN PEDESTAL AS FAR AS
STEP 14. REMOVE QUADRANT COVER
7. REMOVE SINGLE VENT PANEL SCREW
(TX20)
8. REMOVE VENT PANEL
9. REMOVE MOTOR
10. REPLACE MOTOR IN REVERSE ORDER
EXCEPT FIT MOTOR SCREWS (STEP 3)
FIRST
11. FAN AND PULLEY - : THESE PARTS
CAN ONLY BE REPLACED WITH THE AID OF
A PRESS, AS THE MOTOR WILL BE
DAMAGED BY SHOCK LOADS ALONG IT'S
AXIS. THIS MAY SHOW UP AS BELT WEAR
ON THE BODY
12. BRUSHES
13. REMOVE SLEEVE HELD TO TWO CLIPS
http://www.kenwoodservice.co.uk/product-files-kar/sovereign-tech2.htm
Page 7 of 11
30/04/2009