Table of Contents
Advertisement
Assembly:
•
Use manual screw driver to avoid overturning and damaging the screws
•
Make sure wires are not twisted or damaged
•
Regarding the Wax motor – polarization does not matter
•
Put the wires in the cable channel
Put the new cover of the door lock
•
•
Functional test with Service menu after assembly
Details
1-
When assembling
the crossbar needs to be
rotated from the hingebar /
tub
1
2-
3-
When assembling
the crossbar, start with the
When disassembling the ADO Cover there is a risk of breaking the fixation snaps, or at least
front, lower screws for
bending them, and thereby reducing the fixation force of this safety relevant component.
positioning
Therefore, it is mandatory to replace the ADO Cover, once it has been disassembled, with a
new part.
Careful assembly is necessary to ensure the safety function of this protective cover and be
aware that the snaps in the rear do not break. Covers with broken snaps may not be
assembled.
2
Always assemble a new cover of the door lock.
28/60
3
Hide quick links:
Advertisement
Table of Contents
