USING THE CHEST STRAP
The lower part of the display contains a receiver which receives the heart rate signals from the
telemetric chest strap.
The transmission technology used is Bluetooth Smart.
The connection must be repeated with each workout.
Press this button to connect the chest strap. The chest strap must be less than 30 cm from the receiver.
Keep as close to the receiver as possible for 10 seconds to facilitate the connection.
The heart icon flashes on the display while the connection is being negotiated; then, when the connection has been successfully
established, the icon remains lit and the instantaneous heart rate is displayed.
The heart rate is expressed in beats per minute.
If the AVG (average) symbol is present, this means that the average heart rate since the beginning of the exercixe is being
displayed.
If the MAX symbol is present, this means that the maximum heart rate reached during the exercixe is being displayed.
If the % symbol is present, the value shown indicates the ratio between the measured heart rate and the maximum heart rate.
The user's maximum heart rate (100%) is calculated on the basis of age using the following formula: HRmax = 206.9 - 0.67 x age (R. L. Gelish).
If the user's age has not been entered, the default value of 30 will be used.
Group Cycle - Console
Receiver
10
Need help?
Do you have a question about the GROUP CYCLE and is the answer not in the manual?
Questions and answers