Husqvarna P 520DX Operator's Manual page 22

Hide thumbs Also See for P 520DX:
Table of Contents

Advertisement

Available languages

Available languages

2. To adjust the suspension of the seat, pull the lever
(C) to the left. Pull the lever up for more suspension
and push the lever down for less suspension (D).
C
3. To adjust the backrest, pull the lever (E) to the left of
the seat. Move the backrest to the correct position.
4. To adjust the lumbar support, turn the lever (F) to the
left of the backrest. Turn the lever counterclockwise
for more support.
F
22
D
E
To tilt the seat forward (P 520DX, P
525DX)
Pull the lock lever up and tilt the seat forward.
To tilt the seat forward (P 525DX
Cabin)
1. Remove the 2 knobs and the 2 washers.
2. Tilt the seat forward.
To adjust the pedals
WARNING:
during operation of the product.
1. Remove the cutting deck. Refer to
cutting deck on page 18 .
2. Remove the service hatch. Refer to
service hatch on page 33 .
3. To adjust the forward pedal do the steps that follow.
Do not adjust the pedals
To remove the
To remove the
1593 - 002 - 22.12.2020

Advertisement

Table of Contents
loading

This manual is also suitable for:

P 525dxP 525dx cabin

Table of Contents