Husqvarna P 520DX Operator's Manual page 5

35. Emergency exit
36. Display
37. Counterweight
Power outlets
The product has the power outlets that follow:
• 12 V power outlet
• USB outlets
• 12 V AUX power outlet (accessory for P 520DX)
To find the fuses for the power outlet, refer to
overview on page 37 .
To find the outlets, refer to
P 525DX) on page 3 .
Turn the power outlet on and off with the power switch
on the control panel.
Hour meter
The product has 2 hour meters on the display. The hour
meters show how many hours of operation of the engine
has in total (A) and during the operation period (B). The
last digit of the hour meter for the operation period,
shows tenth of an hour (6 minutes).
The time with ignition on but engine off, is not registered.
Note:
The total hour meter (A) only shows full hours.
The engine must to run for a minimum of one hour for
you to see it on the total hour meter (A).
Note:
A operation period is the time the engine been
turned on during 1 day. A new operation period starts if
the engine is turned off for a minimum of 6 h.
A
Husqvarna Connect
The product has wireless technology and can connect to
mobile devices that have the Husqvarna Connect app
installed. The Husqvarna Connect app is a free app for
your mobile device. The Husqvarna Connect app gives
extended functions for your Husqvarna product:
• Lock and unlock function to prevent not approved
operation of the product.
• Extended product information.
• Information about, and help with, product parts and
servicing.
Husqvarna Fleet Services
Husqvarna Fleet Services
the commercial fleet manager an overview of all
1593 - 002 - 22.12.2020
Fuse
Product overview (P 520DX,
™
™
is a cloud solution that gives
products. For more information about Husqvarna Fleet
™
Services , refer to www.husqvarna.com.
To connect to the product with Husqvarna
Fleet Services
1. Download the Husqvarna Fleet Services
your mobile device.
2. Log on to the Husqvarna Fleet Services
3. Follow the instructions about how to pair the product
with Husqvarna Fleet Services
Headlights
The product has a work light and a high beam light.
• Push the power switch to position (A) to make the
lights go off.
A B
• Push the power switch to position (B) to make the
work light come on.
• Push the power switch to position (C) to also make
the high beam light come on.
The work light stays on for 3 minutes after the ignition
key is set to STOP. When the headlights are on, the
display shows the headlight symbol. Refer to
page 7 .
Forward and rearward pedals
B
The speed is gradually adjusted with 2 pedals. The left
pedal (A) is used to move forward, and the right pedal
(B) is used to move rearward. The product brakes when
the pedals are released.
™
™
.
C
A
B
™
app to
™
app.
Display on
5