Advertisement
Maintenance and cleaning
•
Disconnect the power plug from the power supply before touching the accessories. There is a
risk of injury.
•
Use only original spare parts, otherwise there is a risk of injury. The cleaning and maintenance
should be carried out regularly. This ensures efficient performance of the device over a long
time period.
Cleaning
Do not spray the device with water and do not immerse it in water. Danger of electric
shock!
Keep the ventilation slots, the motor housing and the handles clean. Use a damp cloth or brush. Clean-
ing agents or solvents can cause irreparable damage.
Maintenance: exchange of carbon brushes
1. Switch off the device and pull out the mains plug.
2. Let the device cool down.
3. Loosen the sealing cap with a screwdriver.
4. Remove the cap.
5. Pull the carbon brush out of the holder.
6. Slide a new carbon brush into the holder.
7. Reinstall the sealing cap.
8. Repeat steps 1 through 5 on the other side of the tool. Carbon brushes must be replaced only
in pairs.
Storage
Store in a dry place and out of the reach of children.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 62552
Page 6
05
2021-1
Advertisement
