Advertisement
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
General safety instructions for electrical devices
Warning!
Read carefully all safety and general instructions in this manual. Failure to do so can result in
electric shock, fire, or serious injury. Keep the instructions in a safe place so that you can always refer
to them.
Safety in the work area
•
Always keep your work area tidy and well lit. Poorly lit or untidy areas increase the risk of
injury.
•
Do not use electrical devices in potentially explosive areas, e.g., next to flammable liq-
uids, gases or dust. Electrical devices can cause sparks that can ignite these substances.
•
Keep children and bystanders away from your work area while operating an electrical
device. Distractions can cause the loss of control over your device.
Electrical safety
•
Never make any changes to the power supply. Do not use adapter plugs with earthed
power tools. Unmodified plugs and matching sockets reduce the risk of electric shock.
•
Avoid physical contact with earthed surfaces, such as pipes, refrigerators, stoves and
heaters. The risk of electric shock is increased if the body is earthed.
•
Do not expose the device to rain or dampness. Water penetration may increase the risk of
electric shock.
•
Handle the power cord with care. Never carry, pull, or disconnect the device by the cord.
Keep it away from heat, oil, sharp edges, or moving parts. Damaged or tangled power cords
increase the risk of electric shock.
•
If you want to use the electrical device outdoors, use a special extension cord for outdoor
use. Using such a power cord reduces the risk of electric shock.
•
If operating the device in a humid environment, use a protected power supply with a
residual current circuit breaker. Using a residual current circuit breaker reduces the risk of
electric shock.
Personal safety
•
Stay alert. Pay attention to what you are doing and always use the impact driver respon-
sibly and carefully. Do not operate it when you are tired or under the influence of alcohol,
drugs, or medication. Carelessness during use can lead to injuries.
•
Dress appropriately. Do not wear loose clothes or jewellery. Tie long hair together. Keep
hair, clothes and gloves away from moving parts. They can increase the risk of injury as
they can get caught in the moving parts.
•
Avoid accidental switching on. Make sure that the device switch is in the off position
before connecting the device to the mains. Do not carry the electrical device with your finger
placed on the trigger; do not connect it to the mains when the switch is on.
•
Do not lean forward too much. Make sure you stand firmly and keep your balance. A
secure stand and balance enable better control of the impact driver in unexpected situations.
•
Use safety equipment. Wear safety glasses, a respirator, work gloves, and non-slip safety
shoes during work.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 62552
Page 3
05
2021-1
Advertisement
