What's Supplied; Getting To Know Your V-Hub Interface - Data Harvest EASYSENSE V-Hub Reference Manual

EASYSENSE V-Hub Reference Manual DO260 (2)

What's supplied?

A mini USB
connection cable
The V-Hub interface
2 x short sensor leads (3004)
1 x mounting rod
2 x long sensor 1 x mini USB lead
leads (3005) (standard A to mini B)
(3021)

Getting to know your V-Hub interface

Charge EASYSENSE V-Hub fully before first use
Connect V-Hub directly to a USB port on your computer* (or a powered USB hub) using the USB cable
supplied with it. A full charge can take up to 4 hours.
-Hub can also charge from a USB mains charger that outputs 5 V at 1 A or more.
V
A battery charging symbol will be displayed on V-Hub's screen while the logger is charging.
*Your computer must be turned on and not in sleep or standby mode; otherwise the battery may drain instead of
charge.
 Data Harvest Group Ltd, 2017
3