Table of Contents
Advertisement
729 Pro
Users Manual
Figure 8. Current to Pressure Test (I/P) with Internal Connections
Pressure Leak Test
Use this feature to test a pressure device for leaks. For connections, see Figure 9.
1. From this screen, use the arrows, numeric keypad, and E to change the values of
these parameters:
•
Setpoint (Pressure value)
•
Settling Time
•
Test Time
2. Push D (Continue). When the pressure leak test completes, the Product shows
the results. Results include Start Pressure, End pressure, Test time, and Leak rate.
22
Make sure to push E after EACH value change.
To compressed air source
To compressed air source
I/P Transducer
I/P Transducer
Note
In
Out
Advertisement
Table of Contents
