Dry Ironing - UFESA PV0500 Instruction Manual

When adding water to the tank, tilt the iron slightly lifting its tip
upwards, so that water can flow into the tank.
For best ironing results, it is recommended to use fresh
demineralised or distilled water.
Do not use chemically descaled water or any other liquids.
Never exceed the 'max' level marked on the side of the water tank.
4
Close the Water Tank Cover (3).

DRY IRONING

●
Unwind and straighten the Power Cord (5).
1
Press the lock button (6) and unfold the handle (1).
2
Set the voltage selector switch (7) to correct voltage in the country where the
iron is used.
3
Plug the power cord (5) into a power source.
4
Set the steam switch (9) in position
5
Turn the Temperature Dial (8) to "○", "○○" or "●●●".
6
The Heater Light (11) will come on.
The light will go off once the required temperature is reached.
●
The iron is ready for use.
.
C