Advertisement
[键入文字]
7.
Water inlet and inlet
valve assembly
A
R emove
the
fastening
screws for the valve and
inlet box assembly on the
back of the cabinet
B.Remove the 1 screw from
the illustration
W ith the vise clamped off
C.
the water inlet hose, cut off
the cable tie, unplug the
harness connector, remove
the water inlet hose and
inlet pipe, remove the water
inlet box and inlet valve
assembly.
C.If it is not necessary, the
figure may not need to be
removed because it is difficult
to seal again after dismantling.
。
D.
P ick up the water inlet
box and deduct 6 clips
around the water inlet box to
take out the shower
Advertisement
