Personal Precautions - pro.point 8844185 Manual

8844185
4. Wear gloves that provide protection based on the work materials or
to reduce the effects of tool vibration.
5. Wear protective clothing designed for the work environment and tool.
6. Non-skid footwear is recommended to maintain footing and balance
in the work environment.
7. Wear steel toe footwear or steel toe caps to prevent a foot injury
from falling objects.
8. Wear a NIOSH approved respirator when working on materials that
produce hazardous fumes, dust or particulate matter.
9. This tool can cause hearing damage. Wear hearing protection gear with
an appropriate Noise Reduction Rating to withstand the decibel levels.

PERSONAL PRECAUTIONS

Control the tool, personal movement and the work environment to avoid
personal injury or damage to the tool.
1. Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2. Avoid wearing clothes or jewelry that can become entangled with
the moving parts of a tool. Keep long hair covered or bound.
3. Do not overreach when operating the tool. Proper footing and
balance enables better control in unexpected situations.
4. Securely hold this tool using both hands. Using a tool with only one
hand can result in loss of control.
5. Keep your fingers away from the trigger/switch while carrying the
tool, attaching an air hose or an accessory. Lock the trigger/switch
safety if available.
6. Avoid unintentional starts. Be sure that the regulator/throttle switch
is in the neutral or OFF position when not in use and before
connecting it to any air source.
7. Never point the air stream or tool at any point of your body, other
people or animals. Debris and dust ejected at high speed can
cause an injury.
8. Serious injury or death may occur from inhaling compressed air. The air
stream may contain carbon monoxide, toxic vapors or solid particles.
Never inhale compressed air directly from the pump or air tool.
4
Long Barrel Air Hammer
For technical questions call 1-800-665-8685
V1.0