Automatic Safety And Control Devices Of The Oven; Replacing Spare Parts - Cecilware Turbofast TF-1/2 Installation And Use Manual

aUtOMatIC SafetY aND CON-
tROl DevICeS Of the OveN
P
roTecTion of The auxiliary elecTrical circuiT
It is checked by the fuses positioned on a ter-
minal block at the line entry.
P
roTecTion of The chamber fan
A remote switch stops the fan motor in the
event of a malfunction or overload. It is located
behind the oven and must be reset manually.
When it cuts in, it stops the motor and shuts
off the heating elements.
o
ven chamber SafeTy ThermoSTaT
The safety thermostat disconnects the heating
elements if the temperature in the oven cham-
ber is too high (644°F).
It must be reset manually. If it activates, techni-
cal service must be notified.
All components are protected by the following
type of fuse: CLASS CC,G 600V 20A.
ReplaCeMeNt Of SpaRe paRtS
Replacement of spare parts must be per-
formed exclusively by qualified and aU-
thORIZeD personnel.
turn the main switch Off and unplug
the convection oven before carrying out any
spare parts replacement.
rePlacemenT of moTorS
move the back by removing the 4 fastening
screws "A" and the 4 screws "B" that support
them (fig.8).
Fig.7
: it is necessary to re-
2
B
1
A
Fig.8
9