Part Reserved For Installer; Safety Standards; Environmental Standards; Transport And Unpacking - Cecilware Turbofast TF-1/2 Installation And Use Manual

Cecilware tf-1/2: user guide
Table of Contents

Advertisement

Available languages

Available languages

paRt ReSeRveD fOR INStalleR

SafetY StaNDaRDS

The installer must read this booklet
carefully before installing the con-
vection oven.
Installation and subsequent maintenance,
cleaning, inspection and repairs must be
carried out with the electrical power supply
disconnected.
Installation of the ovens must be in com-
ply with current standards in the coun-
try of use. otherwise the manufacturer
shall not honor the warranty in the event of
direct or indirect damage.
Installation, adjustment and assist-
ance are to be carried out by qualified
personnel in compliance with current
accident prevention legislation in the
country of use. The installer must
also check for any fire prevention
regulations.
The manufacturer shall not be held liable
for any damage arising from improper use
of the convection oven, unauthorized modi-
fications and anything not covered by this
manual.

eNvIRONMeNtal StaNDaRDS

All materials used for packaging are compatible
with environmental protection standards. They
may be stored without any hazard, or disposed
of in accordance with current laws in the country
of use. Do not leave the plastic coverings
within reach of children or animals as
they are potentially hazardous.
The plastic components which can be disposed
of and recycled are marked as follows:
PoLYETHYLENE: packaging outer film, instruc-
tions bag, etc.
PoLYPRoPYLENE: clips, etc.
6

tRaNSpORt aND UNpaCkINg

Any movement of the oven must be carried out
by suitable means such as a forklift or pallet
loader. These must be at least half as large as
the convection oven (see fig.1).
If it is necessary to store the oven temporarily,
keep it in a covered, ventilated place at a tem-
perature from 14°F to 122°F, with humidity no
higher than 95%.
Use protective gloves and remove the pack-
aging. Lift the oven with a forklift, remove the
base and place it in its intended location.
After removing the packaging, immedi-
ately check the condition of the oven.
If in doubt, do not use the oven.
Contact an authorized retailer.
Fig.1

Advertisement

Table of Contents
loading

Table of Contents