Table of Contents
Advertisement
Installation
1
Assembling the fixture
The light bulb is not included with this
IMPORTANT:
light fixture. A 100 watt maximum medium-base
bulb or 26 watt maximum CFL equivalent is required.
Unpack the fixture and lay all parts on a clean, soft surface.
Screw the finial (D) onto the bottom of the fixture body (C).
Install a light bulb (not included) into the socket of the
fixture body (C).
Place the top cover (B) onto the top of the fixture body (C),
aligning the holes. Secure together using the fixture screws
(A).
2
Mounting the bracket
Screw the two mounting screws (FF) into the mounting
bracket (CC). Attach the mounting bracket (CC) to the outlet
box using the two outlet box screws (EE). Ensure the threads
of the mounting screws (FF) are facing outside when the
mounting bracket (CC) is attached to the outlet box.
Disconnect the power by turning it off at the
CAUTION:
circuit breaker or removing the fuse at the fuse box.
3
Connecting the wires
Wrap the ground wire from the fixture around the ground
screw (DD) on the mounting bracket (CC), and then connect
the ground wire from the fixture to the ground wire from the
outlet box.
Connect the white wire from the fixture to the white wire
(neutral wire) from the outlet box. Connect the black wire
from the fixture to the black wire (live wire) from the outlet
box. Cover the three connections using the wire connectors
(BB).
Wrap the connections with electrical tape and position the
wires back inside the outlet box.
D
5
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM
Advertisement
Table of Contents
