Device Assembly - HYPERVSN MS Operating Manual

Important.
• If the Device has been stored in low temperatures, leave it indoors for at
least 2 hours before use. This avoids moisture condensing on the internal
components of the Device, which otherwise may damage to the Device.
Do not touch the LEDs on the rays. This may damage them.
•
Attention. Before assembling the Device, double-check that the components seem to
be in good working order:
Ensure that the wireless antenna remains intact. (Do not cut the wireless antenna
•
off).
• The rays should not have any cracks or other visual damage.
The stator should not have any dents in it.
•
Contact your supplier if you notice any irregularities during the visual check.
12
5.

DEVICE ASSEMBLY

Picture 5. Wireless antenna
© Copyright 2019 HYPERVSN. All rights reserved
WIRELESS ANTENNA