BMW F 800 R Rider's Manual page 103

Rear brake-pad wear
limit
min 0.04 in (min 1.0 mm)
(Only friction material without
carrier plate. The wear mark-
ings must be clearly visible.)
If the wear indicating mark is no
longer visible:
WARNING
Dropping below the minimum
pad thickness
Reduced braking action, damage
to the brake
In order to ensure the operat-
ing reliability of the brake sys-
tem, make sure that the brake
pads are not worn beyond their
minimum thickness.
Have brake pads replaced by
a specialist service facility,
preferably an authorized
BMW Motorrad retailer.
Checking front brake fluid
level
WARNING
Insufficient brake fluid in the
brake-fluid reservoir
Considerably reduced braking
performance caused by air in the
brake system
Check brake fluid level
regularly.
Make sure ground is level and
firm and hold motorcycle verti-
cally.
OE
with center stand
Make sure ground is level and
firm and place motorcycle on
its center stand.
Move handlebars into straight-
ahead position.
Check brake fluid level in front
brake-fluid reservoir 1.
NOTICE
The brake fluid level in the brake-
fluid reservoir drops due to brake
pad wear.
9
101
z