Unical Air UND A 9H Instruction Manual page 6

2.2
COOLING
COOL
Press the key or
appears on the display, the conditioner cools the room
and at the same time reduces the humidity in the air.
The cooling cycle is activated by setting the keys
"TEMP" + or - at a temperature lower than that of the
room.
Example: the room temperature is 28° C, if we set the
cooling at a temperature lower than 27°, the compressor
will immediately start. The device automatically adju-
sts the working cycles of the compressor keeping the
wished temperature in the room.
Example:
If the room temperature is higher than 27°C, set a value
between 24°C and 27°C on the remote control. Close cur-
tains and windows to protect the room from the sun.
To optimize the functioning of the conditioner adjust the
temperature (1), the speed (2) (see chapter 2,6) and the
direction of the air flow (3) by pressing the keys indica-
ted in the figure.
2.3
DEHUMIDIFICATION
MODE
Press the key until the symbol
display: a completely automatic function of alternating coo-
ling cycles and air fan is activated. This allows the humidity
and the room temperature to be kept constant without relevant
variations in temperature (the temperature can also be set by
the user.
The working is completely automatic and the device
adjusts the speed of the fan.
This function reduces the humidity of the air to make
the room more comfortable.
To optimize the functioning of the conditioner adjust
the temperature (1), the speed (2) (see chapter 2,6) and
the direction of the air flow (3) by pressing the keys
indicated in the figure.
The dehumidification "DRY" automatically selects the cooling keeping the temperature set and the room tem-
perature on balance.
MODE
until the symbol
appears on the
AUTO
FA N
OPER
AIR HEALTH BLOW
HUMIDITY
%
FILTER
° C
TURBO
HOUR
ON/OFF
LIGHT
ON/OFF MODE
+
COOL HEAT
FAN SWING
2
BLOW TIMER
TURBO SLEEP
AUTO
FA N
OPER
AIR HEALTH BLOW
HUMIDITY
%
FILTER
° C
TURBO
HOUR
ON/OFF
LIGHT
ON/OFF MODE
+
COOL HEAT
FAN SWING
2
BLOW TIMER
TURBO SLEEP
1
3
1
3
7