Unical Air UND A 9H Instruction Manual page 10

2.12
TIMER
TIMED STOP (fig. 1)
The timed stop is programmed with the appliance on.
TIMER
Pressing at every selection of the key + or - the
Timer goes on of 0,5 HR. (30 minutes) till it reaches the
24 hours.
Press the key + or - more times till on the display you
can read the time in hours which passes between the
programming and the timed stop: press
to confirm!
TIMED START (fig. 2)
To program the timed start, the appliance should be off
Press : every time you press the key + or - the
TIMER
Timer goes on of 0,5 HR.
(30 minutes) till it reaches the 24 hours.
Press the key + or - more times till on the display you
can read the time in hours which passes between the
programming and the timed start: press
to confirm!
IMPORTANT
Before proceeding with the timed start:
·
program the working mode with the key
the fan speed with the key
·
switch the conditioner off (with the key ON/OFF).
The function allows to automatically activate or deactivate the conditioner at the wished time and thus saving a lot of
energy.
3
TRICKS TO SAVE ENERGY
·
The use of the Timer is advised whenever you want to program the timed start in order to avoid the
conditioner to work unnecessarily when you are out of the house.
·
Never program a too high temperature in heating and a too low one in cooling.
·
Try not to frequently open and close doors and windows; the continuous warmth exchange with the outside
hinders the conditioner work.
·
it is better not to install the units in places directly exposed to the sun.
·
Use the function "SLEEP" during the night.
OFF
TIMER
ON
TIMER
MODE
FAN
.
fig. 1
and
fig. 2
AUTO
FA N
OPER
AIR HEALTH BLOW
HUMIDITY
%
FILTER
° C
TURBO
HOUR
ON/OFF
LIGHT
ON/OFF MODE
+
COOL HEAT
FAN SWING
BLOW TIMER
TURBO SLEEP
AUTO
FA N
OPER
AIR HEALTH BLOW
HUMIDITY
%
FILTER
° C
TURBO
HOUR
ON/OFF
LIGHT
ON/OFF MODE
+
COOL HEAT
FAN SWING
BLOW TIMER
TURBO SLEEP
11