Unical Air UND A 9H Instruction Manual page 4

1 REMOTE CONTROL – PUSHBUTTONS AND MAIN FUNCTIONS
The remote control has been designed for an easy and fast use.
USE OF THE REMOTE CONTROL
1. Direct the remote control toward the conditioner.
2. Check that there are no objects between the remote control
and the receiver on the conditioner.
3. The signal of the remote control can be sent from a max.
distance of 10 mt.
4. Never leave the remote control exposed to the rays of the
sun
ON/OFF
It is used to switch the conditioner on and off.
When the remote control is on, the message
the display.
Selection of working mode as to the sequence:
MODE
(AUTOMATIC WORKING)
(COOLING)
(DEHUMIDIFICATION)
(FAN)
(HEATING)
The two pushbuttons set the wished temperature between
16° C and 30° C.
-
The temperature raises or decreases by pressing + or - res-
pectively.
Selection of fan speed as to the sequence:
FAN
AUTO FAN
FAN
FAN
FAN
SWING
Activation or deactivation of the movement of the "Flaps".
SLEEP
It activates the function "SLEEP".
This function automatically adjusts the temperature to opti-
mize the climate of the room making it comfortable during
the night sleep and thus favouring the saving of energy.
TIMER
Timed start/stop programming.
COOL
Selection of cool mode directly.
HEAT
Selection of heat mode directly.
TURBO
Selection of turbo mode.
BLOW Selection of blow mode, anti-mould.
LIGHT
Display lighting.
N.B.The unit confirms the correct reception of each pushbutton with a beep.
(automatic)
(low)
(middle)
(high)
appears on
OPER
TURBO
TURBO
AUTO
FAN
OPER
AIR HEALTH BLOW
HUMIDITY
%
FILTER
°C
TURBO
HOUR
ON/OFF
LIGHT
ON/OFF MODE
+
COOL HEAT
FAN SWING
BLOW TIMER
SLEEP LIGHT
AUTO
FAN
OPER
AIR HEALTH BLOW
HUMIDITY
%
FILTER
°C
TURBO
HOUR
ON/OFF
LIGHT
ON/OFF MODE
+
COOL HEAT
FAN SWING
BLOW TIMER
SLEEP LIGHT
5