Synchronize With Casio - Casio PV-750 Plus User Manual

Working with PC sync
The check box titled Detect Automatically Synchronization Start is activated by de-
fault. If you have connected the BN/PV Unit to the PC and start the synchronization on the
BN/PV Unit by pressing the Start button on the cradle (If you are using a PV-200e unit, tap
the PC sync icon in the lower left corner of its screen) – during PC sync is running (also in
the background) – the synchronization program will start automatically on the PC. If there
are any problems with the serial port, simply press <SHIFT> during the program start – then
the automatic check of the serial port will not be executed.
Also note that an automatic check may reduce the speed of some other applications running
at the same moment. So if you want to speed up the corresponding application, simply
deactivate the check box.
Via the [File List] tab, all the files used during the previous synchronizations will be listed.
Via the [Remove] button, you can remove the marked file from the list.
Note:
If you use the automatic detection of synchronization (i.e. if Detect Automatically
Synchronization Start has been enabled), you can select the [Areas] in the
synchronization setup that are to be synchronized when you press the Start button on
the cradle (or, if you are using a PV-200e unit, tap the PC sync icon in the lower left
corner of its screen). Whenever you start synchronization from the PC, the area
selection dialogue is presented.

3.3.2 Synchronize with Casio

If you execute the synchronization between the PC sync file and the BN/PV Unit for the first
time or if you use another file than during the previous synchronization, a dialog box
appears indicating that the BN/PV Unit has not been assigned to a PC sync file. In order to
proceed with the synchronization, you can now press one of the following buttons:
[OK]
The data will be "reorganized", i.e both the items in the PC sync file and those in the BN/PV
Unit will be considered as "new", and the synchronization will then be started. Therefore,
this type of synchronization corresponds to a complete send and receive process of all the
data of both units.
[Browse]
A dialog box for selecting a file appears. Possibly the file to which the BN/PV Unit has been
assigned will be displayed automatically. If you select another file, the dialog described
above will appear.
[New File]
If you select this button, the data of the BN/PV Unit will be "reorganized", i.e considered as
"new". For the PC sync file, the same diary type will be set which has already been used for
the file currently opened. If this is not possible, the Default Digital Diary will be used
automatically.
25