Loading Data From Casio Fa-127 Or Fa-128 - Casio PV-750 Plus User Manual

Working with PC sync
Choose [OK] to confirm your settings. Now select the Destination Digital Diary in the right list
(this is the BN/PV Unit to which the data will be transferred finally) and click on [OK]. As we
want to transmit all the available database areas, click on the [All] button in the right-hand
section of the dialog box. Under "Scope" select [All Items], and under "Mode" [Append].
Before starting transmission on your PC with [OK], you need to prepare your Digital Diary for
the sending of all data. You can find the relevant key presses in Appendix C. To start
transmission, click on [OK] on your PC, followed by the appropriate on the Digital Diary.
Note:
Always start transmission on the unit to which you intend to transmit. This is important
to avoid loss of data.
During reception a status box is displayed, telling you how far transmission has pro-
gressed. To stop transmission on the PC, choose [Abort], and on the Digital Diary either
or . If transmission is aborted on one unit, then the other unit automatically
stops, too. This behaviour may vary from one model to another.
Note:
It is neccessary to use an optional interface-cable to connect other CASIO Digital
Diaries. The cradle included in the PC sync package can only be used with BN/PV Units
– it will not fit into other CASIO Digital Diaries.
If you want to connect the CASIO Digital Diaries SF-5590SY, SF-5590SYE, SF-5790SY,
SF-5790SYE, SF-5990SY, SF-5990SYE, SF-6500SY, SF-6700SY, SF-6900SY, SF-
7100SY or SF-7200SY to PC sync, it is necessary to use an optional cable that comes
with CASIO FA-128.
Connection of any other CASIO Digital Diary model requires use of an optional SB-85
cable or the cable that comes with the FA-127 package.

3.7 Loading data from CASIO FA-127 or FA-128

You can easily load FA-127 and FA-128 v1.0 files into PC sync. Simply select 'File', 'Open '
and select the relevant "twf" file in the dialog box. Click on [OK]. If the FA-127/128 file is
password-protected, enter it now. As you load the FA-127/128 file, it is automatically
converted to an PC sync file. However, to do so, PC sync needs to know the BN/PV Unit for
which these data items are intended. A dialog box is presented, prompting you to enter your
BN/PV Unit, whereupon the data is loaded and displayed.
Note, however, that when you save this new file, it will have the format of an PC sync file
and can no longer be read by FA-127/128. To keep your original FA-127/128 file intact,
simply give the new file a different name. If you try to open an PC sync file in FA-127 or FA-
128, an error message is presented.
Data items from the Business Card area are taken over in Business Contacts in PC sync. If
areas are not available in PC sync (e.g. Free Files), they cannot be transferred. If at all
possible, you may therefore want to copy such data to a different area while you are still in
FA-127.
31