Casio Cassiopeia IT-2000 User Manual page 9

11
Bottom
11 PC card lock button
(inside PC card slot
cover)
12 PC card eject button
(inside PC card slot
cover)
13 PC card slot cover
14 Neck strap bars
15 Charger connectors
16 Backup battery
compartment
17 Open button
18 Lithium ion battery
pack compartment
19 Initialize button
20 14-pin serial interface
connector
Note! Pressing the Initialize button clears all data and programs from memory.
Never press the Initialize switch unless absolutely necessary.
Top
12
14
Locks optional PC card in place. Make sure this button is in the LOCK
position when using a PC card. The PC card is not detected by the
Data Collector when this button is in the LOCK release position.
Press this button (after opening the PC card slot cover and setting the
PC card lock button to lock release position) to eject a PC card
installed in the Data Collector.
Open when inserting or removing a PC card.
For connection of the neck strap.
These connectors mate with Optical Communication Unit connectors
to receive electrical power for charging of the lithium ion battery pack.
Houses the lithium battery used for memory backup.
Slide to open the battery pack cover.
Houses the lithium ion battery pack that is the Data Collector's main
power supply.
Use a paper clip or other thin, pointed object to press this button to
launch the Data Collector's system initialization routine.
For connection of future expansion options.
Back
13
16
17
18
15
19
20
E-9