Hardware Contents; Preparation; Estimated Assembly Time; Tools Required For Assembly And Leak Testing - Dyna-Glo DGH483CRP Manual

HARDWARE CONTENTS (shown actual size)
AA
M6x16
Screw
Qty. 39
EE
M6 Spring
Washer
Qty. 2

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list on previous page and hardware contents above. If any part is missing or damaged, do
not attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 50 minutes with 2 people.
Tools Required for Assembly and Leak Testing (not included): Phillips screwdriver, Spray bottle
THIS UNIT IS HEAVY. Two people required for safe assembly.
Two people required for safe assembly. Some parts may contain sharp edges. Wear protective
gloves if necessary. Read and follow all safety statements, warnings, assembly instructions and
use and care instructions before attempting to assemble and use.
BB
M4x12
Screw
Qty. 8
FF
M6 Wing
Nut
Qty. 2
CAUTION
CC
Door Upper
Hinge
Qty. 2
GG
M10
Wrench
Qty. 1
6
DD
M6 Plain
Washer
Qty. 2