Dyna-Glo DGH483CRP Manual page 15

ASSEMBLY INSTRUCTIONS
16. Insert two M6x16 screws (AA) in right side of
Grill body (D) as shown, leaving 5mm of threads
exposed. Align key hole in Right side table (P)
with the two screws just inserted in the Grill body
(D), and insert three M6x16 screws (AA) in the
remaining holes in the Grill body (D). Adjust Right
side table (P) correctly, then tighten all screws.
Hardware Used
AA
M6x16 Screw
17. Attach the smoker box front support (C1) and
smoker box rear support (E1) to the smoker
box (D1) with four M4x12 screws (BB)
Hardware Used
BB
M4x12 Screw
16
x 5
AA
17
C1
x 4
15
AA
D
P
AA
D1
E1
BB