Dyna-Glo DGH483CRP Manual page 16

ASSEMBLY INSTRUCTIONS
18. Optional Smoker Box Usage Instructions: Fill
the smoker box with presoaked wood chips.
Open the lid and position the Smoker Box (D1)
by placing the Smoker Box Front Support (C1)
and Smoker Box Rear Support (E1) inside
the Grill Body (D) as shown in the image. The
Smoker Box can be placed on any of the three
locations as also shown in the image. Follow
the lighting instructions until wood chips begin
to smoke. For best results and longer lasting
smoking, reduce the heat after the wood chips
begin to smoke.
Note: Placement of Smoker Box (D1) in the
Grill Body (D) is an option only if smoking the
food is desired during grilling. For general
purpose grilling without smoking, remove the
Smoker Box from the Grill Body.
19. Place 4 Heat tents for main burner (L) and 1
Heat tent for sear burner (M) on the inside of
the Grill body (D).
18
D1
19
L
16
D
E1
Warning: Do not place
smoker box in this position.
1 3
2
1
C1
2
3
D
M