Dyna-Glo DGH483CRP Manual page 17

ASSEMBLY INSTRUCTIONS
20. Place 2 Cooking grates for main burner (J) and
Cooking grate for sear burner (K) into Grill body
(D) as illustrated in the figure. Secure Warming
rack (I) into Grill body (D).
NOTE: Insert the Warming rack (I) into the four
holes located on both sides of Grill body (D).
21. Insert Grease pan (G) into position by sliding
it in the Grill Body (D) from the rear as shown,
along the rails located just below the underside
of the Grill body (D), and insert the Grease cup
(H) into position by sliding it onto the rails on
the bottom of Grease pan (G).
20
I
J
21
17
D
K
D
G
H