FIBARO Home Center 3 Lite Manual page 29

Scenes allow automating your system to provide the real Smart Home experience. They can integrate
multiple devices included in your system and may be activated by weather conditions, a series of intuitive
timers or various sensor/module states.
There are two types of scenes to create in the interface:
Block Scenes (/home-center-3-block-scenes/) are easy to build. Using number of available customizable
blocks complex scenes can be visually created. It is not possible to implement all functionalities of the
FIBARO System with Block Scenes, but are the best way for a basic user to enhance home automation.
Lua Scenes (/home-center-3-lua-scenes/) are most advanced, but allow user to fully utilize all FIBARO
System capabilities. Such scenes are based on the Lua programming language and require basic
programming skills.
Creating scenes
Open the Con guration Interface.
1
Go to > Scenes.
2
Click Add scene.
3
Choose scene type.
4
Set basic settings:
5
Name – name of the scene.
Run scene – choose if the scene will be run automatically (when conditions are met) or
manually (ignore conditions).
Allow to restart a running scene – if set toYes, every new activation of the scene restarts it, if
set to No, scene can't be activated again if it is already running.
Category – categories are used for ltering scenes by type.
Icon – icon that will represent the scene.
Save.
6
Read further on creating scene using blocks here (/home-center-3-block-scenes/).
Editing scenes
Open the Con guration Interface.
1
Go to > Scenes.
2
Click the
3
Edit scene.
4
Save.
5
Deleting scenes
Open the Con guration Interface.
1
Go to > Scenes.
2
Click the
3
to edit the scene.
to delete the scene.