Secure Connection; Users And Access - FIBARO Home Center 3 Lite Manual

Using button on the cover:
Hold the D button for 20 seconds.
1
Click when the indicator is blinking red.
2
Using Recovery Interface:
Open the
1
In Network Settings section click Reset.
2

Secure connection

The gateway can use HTTP and HTTPS protocols for communication. Use HTTPS to ensure security by
encrypting communication.
To set connection type:
Open the Con guration Interface.
1
Go to > Network > Secure Connection.
2
Select connection type:
3
HTTP – standard connection without additional encryption,
HTTPS – secure encrypted connection,
HTTP/HTTPS – the gateway will accept both types of connection.
Save.
4
REMEMBER: Your browser might show you a warning when connecting via HTTPS, in this case, do the
following:
1) Download certi cate from the Secure Connection section in Network settings and install it on your system
(and browser),
2) Use the gateway's serial number to connect locally, i.e. use serial_number.local, e.g. https://hc3l-
00000001.local
 Installing root certi cate on Windows
 Users and access
Users
User roles
Admin – only one user, can con gure the system, operate devices, add users and give them
permissions.
User – one or more users, can switch devices on/o , see the state and history data of devices.
Recovery Interface.
 Back To Top