Switching Between Systems; Repairing System - FIBARO Home Center 3 Lite Manual

In case of problems after updating your system, you can quickly repair it by using auto-repair. It will switch
to copy of your system from before the last system update.
Enter the Recovery Mode.
1
Click Auto-repair.
2
Con rm.
3

Switching between systems

You can switch between system A and B at any moment using the Recovery Mode, e.g. when current system
encounters a problem.
Enter the Recovery Mode.
1
Click Switch to System A/B.
2
Choose if you want to restore Latest version or use Local le.
3
Con rm.
4

Repairing system

This feature allows you to restore the operating system to the latest version or version from a le without
deleting any user data. Only the system will be refreshed.
Depending on how you have entered the Recovery Mode, di erent system will be available for repairing:
inactive when entered via con guration interface or active when entered using
repair the other one.
Enter the Recovery Mode.
1
Click Repair System A/B.
2
Choose if you want to restore Latest version or use Local le.
3
Con rm.
4
Resetting network settings
In some cases, problems with the gateway may be caused by changes in the network con guration of the
environment in which the gateway is located. If you do not want to restore the entire system to factory
settings, try resetting the network settings rst, as this may solve your problems with the gateway.
Enter the Recovery Mode.
1
Click Reset in the Reset Network Settings section.
2
Con rm.
3
Recovering system
CAUTION: The con guration will be removed and lost if not backed up.
This feature allows you to restore the operating system to the latest version or version from a le and delete
all data from this system (users, devices, scenes etc.).
button. Switch system to