Adding Zones; Zone Modes - FIBARO Home Center 3 Lite Manual

Go to > Devices.
2
Click .
3
Choose Other Device.
4
Click Thermostat.
5
Enter the name of the thermostat.
6
Choose a Room.
7
Choose the main device.
8
Select heating and/or cooling devices.
9
Save.
10

Adding zones

Open the Con guration Interface.
1
Go to > Climate.
2
Click Add Zone.
3
Select how zones should be created:
4
Automatically – zones will be created automatically for all rooms with temperature devices.
Manually – manually select devices to be included in the new zone.

Zone modes

Schedule – zone works according to the set schedule.
Manual – constant temperature is set for a speci ed time duration.
Vacation – constant temperature is set until disabled.
Con guring zone schedule
Open the Con guration Interface.
1
Go to > Climate.
2
Click > to expand the zone.
3
Select operating mode:
4
Heating: devices increase the temperature to reach the temperature setpoint,
Coolin: devices decrease the temperature to reach the temperature setpoint,
Auto: devices determine if they should cool or heat to reach the temperature setpoint,
O : devices are always o .
Set start times for periods by moving the sliders or entering them below.
5
Enter temperatures to be set on each period.
6