Cleaning - Whirlpool AKG668 Instructions For Use And Installation

AKG668 Installation & Instructions for Use
ALL parts of the oven can be
safely cleaned with a clean cloth
wrung out in hot soapy water but
let the oven cool before cleaning.
To avoid damaging the surfaces
when removing stubborn marks,
we recommend the following:
GLASS PARTS (Facia control
panel, Door panel)
DO NOT use abrasive cleaners or
polishes. Use a mild cream
cleaner rinse thoroughly and dry
with a soft cloth.
CAUSTIC PASTE, ABRASIVE
POWDERS, COARSE
WOOL AND HARD TOOLS;
WILL DAMAGE THE SURFACE.
IMPORTANT:
The inner oven door glass panel
can be removed for cleaning.
To remove the glass panel, open
the door wide, hold the top and
bottom edges and slide out.
When refitting, take care that the
glass is held level and straight
with the grooves in the door trims
before sliding back.

CLEANING

PAINTED PARTS (Door frame,
Door handle, Outer frame trim)
ONLY use a clean cloth wrung
out in hot soapy water.
VITREOUS ENAMEL PARTS
(Grill pan / Grill compartment)
Use a mild cream cleaner. Look
for one which has the VITREOUS
ENAMEL COUNCIL'S seal of
approval.
WIRE
4