Parameter Lists; Command Parameters; System Parameter List - Casio CTK-900 Midi Implementation Manual

Part V

Parameter Lists

These lists show the parameters that can be transferred individually using System Exclusive Messages.
Note 1: Any parameter that has "r" to the right of its Parameter ID number is a read-only parameter that can be
•
used for obtaining status information only. A parameter with "w" next to its Parameter ID is a write-only parameter,
which is used for commands, etc.
Note 2: All values in the System Exclusive Format table are hexadecimal. Except for the "Setting Value" column,
•
all values in the Parameter Lists are hexadecimal, unless specifically noted otherwise.
Note 3: Receipt of a value outside a specified range causes the value marked "Default" to be used instead.
•
20

Command Parameters

The parameters defined here mainly execute commands and indicate statuses. Values indicate the pointer to a
command or a status.
20.1

System Parameter List

System Exclusive Format
Field Value
01 SYSEX F0
02 MAN 44
03 MOD 11,02
dev
04 Either 00 to 1F, or 7F
act
05 00(IPC), 01(IPR)
cat
06 Command = 0
prm
07 00-7F
ilen/dlen 0 / bit size - 1
08
ps
09 LSB,MSB = 00, 00
index
10 00
data
11 See the Parameter List
sum
12 None
13 EOX F7
43