9. Settings
Set up your DVR
Follow the steps to finish settings:
1. Slide the Power Switch to ON to power on your DVR. You will hear a buzzer
beep. Your DVR goes to preview mode at this time.
2. Press [M] to enter settings.
3. Press [<] or [>] to select Settings.
4. Use the [+] or [-] button to select the desired option.
5. Press [OK] if your want to set the desired item.
6. Select the parameter by pressing [<] or [>].
7. Press [OK] to confirm your selection.
8. Press [M] again to go back to preview mode.
Set up options
The following settings are available:
Options
Beep
REC. LED
Time Display
Auto Standby
TV Standard
Format
Default
Language
Frequency
Date
FW
What it means
Turn on or off beep.
Turn on of off REC. LED.
Add date and time stamp to the videos, voices, and photos.
Choose a time span to power off your DVR automatically when there is no
operation.
Choose the TV standard: NTSC or PAL.
Format the Micro SD card connected to your DVR.
Restore to default settings.
Select a language displayed on your DVR.
Select a band to avoid the impacts on photos caused by flickers from
lighting sources.
Set up the current time and date.
Check the firmware version of your current system.
USER MANUAL
RoadRunner PCDVRR700X
9
16