Table of Contents
Advertisement
Remote control
Pair the remote control with your DVR
1. Power off your DVR.
2. Press and hold the Record button on your DVR.
3. Slide the Power switch on your DVR to ON.
4. Release the Record button on your DVR.
5. Press and hold the Record and Stop button on the remote control.
6. After you hearing two beep, the remote control is paired with your DVR.
Use the Remote control
- Press Record button to start recording.
- Press Stop button to stop recording.
- Press Capture button to take photos.
- Press and hold Capture to turn on or off laser transmitter.
Record
Capture
Stop
USER MANUAL
RoadRunner PCDVRR700X
3
Advertisement
Table of Contents
