6. Vioce Record
Please confirm that there is a memory card connected before vioice
recording.
Record voice
1. Slide the Power Switch to ON to power on your DVR. You will hear a buzzer beep. Your DVR
goes to preview mode at this time.
2. Press [M] to enter settings.
3. Press [<] or [>] to select Camcorder.
4. Use the [+] or [-] button to select Capture Mode.
5. Press [OK] and then press [<] or [>] to choose voice recording " "
6. Press [OK] to confirm your selection.
7. Press [M] again to go back to preview mode.
8. Press the Record button to start recording.
9. Press the Record button again to stop recording and save the file.
Start recording by voice control
There is a VOX switch on your DVR. Slide the VOX Switch to ON to enter voice control mode, your
DVR will start recording automatically when the voice decibel is higher than 65 dB.
1. Slide the Power Switch to ON to power on your DVR.
2. Press [M] to set your DVR if necessary.
3. Slide the VOX Switch to ON to activate voice control.
4. The DVR will start recording automatically if the decibel is higher than 65dB.
USER MANUAL
RoadRunner PCDVRR700X
6
12