Photo Capture; Camera Settings; Take A Photo; Take Continuous Shots - Prestigio RoadRunner 700X User Manual

Portable car video recorder
Hide thumbs Also See for RoadRunner 700X:
Table of Contents

Advertisement

5. Photo capture

With your DVR, you can capture photos in burst, which can be the evidence
when the accident happens.
Please confirm that there is a memory card connected before photo capturing.

Camera settings

Before capturing photos, customise your DVR settings.
1. Slide the Power Switch to ON to power on your DVR. You will hear a buzzer beep. Your DVR
goes to preview mode at this time.
2. Press [M] to enter settings.
3. Press [<] or [>] to select Camera. The following options are available.
- Single Shot: Take single photo while pressing the capture button.
- Tripple Shot: To take three photos by pressing Capture button once.
- Continuous: Take one photo every 2S/3S/5S/10S/20S/30S untile you press capture button
again.
- Self Shot: Select a time span for auto photographing.
- Resolution: Set the resolution of photos.
4. Use the [+] or [-] button to select the desired option.
5. Press [OK] if your want to set the desired item.
6. Select the parameter by pressing [<] or [>].
7. Press [OK] to confirm your selection.
8. Press [M] again to go back to preview mode.

Take a photo

1. Slide the Power Switch to ON to power on your DVR.
2. Aim your camera lens to the subject.
3. Press the Capture button.

Take continuous shots

With your DVR, you can take continous shots by just pressing the Capture button once.
1. Press [M] to enter settings.
2. Press [<] or [>] to select Camera.
3. Use the [+] or [-] button to Continuous.
4. Press [OK] and then press [<] or [>] to choose the time span for continuous capturing.
5. Press [M] again to go back to preview mode.
6. Press the Capture button.
7. If you want to stop capturing, press the Capture button again.

Take a photo of yourself

1. Press [M] to enter settings.
2. Press [<] or [>] to select Camera.
3. Use the [+] or [-] button to Self Shot.
4. Press [OK] and then press [<] or [>] to choose the time span for self capturing.
5. Press [M] again to go back to preview mode.
6. When you're ready to take the photo, press the Capture button.
USER MANUAL
RoadRunner PCDVRR700X
5
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pcdvrr700x

Table of Contents