Settings; Video Settings; Picture Settings - Prestigio RoadRunner 340 User Manual

3. Settings

Before recording, you can set up the device according to your
requirements.
- In video/picture preview mode, press [MENU] to enter video/picture
settings, press it again go the general settings, press it third time to
exit.
- In setting list, use [◄]/[►] to navigate the menu, press [OK] to get
the options and confirm the selection, press [MENU] to exit.

Video settings

• Resolution: Select the resolution of recorded video: FHD 1920 x 1080, 720P 1280x720, VGA
640 x 480.
• Loop recording: Video recording is provided in a cyclic order and chosen periods. When
micro SD card is full then the oldest unprotected files will be replaced by new recorded files.
• WDR: Off/On. Turn on or off Wide-dynamic-range.
Exposure: Set exposure value to determine how much light the camera's sensor receives.
For lowlight situations, use a higher exposure.
• Motion Detection: Off, Low Level, Middle Level, High Level. DVR automatically starts
recording when motion is detected in front of camera. Recording stops when there is no
movement any more but a delay of 15-20 seconds. The function works only when power is
supplied.
• Record Audio: Off/On. Set to record sound or not.
• Date Stamp: Off/On. Add date stamp onto videos.
• G-sensor: Off, Low Level, Middle Level, High Level. Select the sensitivity of the G-sensor. A
recording video file becomes automatically protected when collision, shake or emergency
braking occurs.
• Parking Mode: Off/On. DVR automatically turns on and starts recording a protected file
when any shaking or stroke is detected. (DVR must be disconnected from power).

PICTURE SETTINGS

• Capture Mode: Set the timer: Without timer, 2S Timer, 5S Timer, 10 S timer.
• Resolution: Select the picture image size from 12MP, 10MP, 8MP, 5MP, 2MP, 1.3MP, VGA.
• Sequence: Turn off/on photo sequence.
• Quality: Set the photo quality Fine/Normal/Economy.
• Sharpness: Adjust the sharpness Strong/Normal/Soft.
• White Balance: Select an appropriate white balance, so images have a true-to-life color
range. It is for specific lighting situations. Auto, Daylight, Cloudy, Tungsten, Fluorescent.
• Color: Set the photo color Color/black&white/sepia.
• ISO: Set the ISO Auto/100/200/400.
• Anti-Shaking: Off/On.
• Date Stamp: Off, Date, Date/Time. Add data stamp onto photos.
Exposure: Set exposure value to determine how much light the camera's sensor
receives. For lowlight situations, use a higher exposure.
Quick Review: Off/ 2 Seconds/5 Seconds.
User Manual RoadRunner
3
3
340