Dea 202 E Instructions And Warnings
Dea 202 E Instructions And Warnings

Dea 202 E Instructions And Warnings

Control board 230 v for gate automation operating
Hide thumbs Also See for 202 E:

Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 202 E and is the answer not in the manual?

Questions and answers

Summary of Contents for Dea 202 E

  • Page 2 1 PRODUCT CONFORMITY The 202 E programmable control board bears the CE label. DEA SYSTEM guarantees the conformity of the product to European Directives 89/336/CE and subsequent amendments (concerning electroma- gnetic compatibility), 73/23/CE and subsequent amendments (low voltage electrical equipment) 2 WARNINGS Read these warnings carefully.
  • Page 3 Control board 202 E is supplied with external assembling case with protection level IP 54. 4 PRODUCT DESCRIPTION 202 E control board has been designed only for DEA System 230 V a.c. swing gates automation. Main features of the product: •...
  • Page 4 Operating instructions and warnings Protection level ..........IP 54 6 OPERATING CONDITIONS 202E control board is designed for the automation of swing gates operated by 230 V a.c. motors. This control board has been designed and tested for operation under “normal” conditions for both residential and industrial use.
  • Page 5 Operating instructions and warnings programming function or to exit the programming (all leds are turned off).Radio control memory reset: 1. Press repeatedly the “SEL” key until the RADIO led turns on. 2. Press the “SEL” key and continue to press it until the led starts quickly flashing (under cancellation), release the key.
  • Page 6 WARNING DEA System reminds all users that the selection, positioning and installation of all ma- terials and devices which make up the complete automation system, must comply with the European Directives 98/37/CE (Machinery Directive), 89/336/CE and subsequent amendments (electromagnetic compatibility), 73/23/CE and subsequent amendments (low voltage electrical equipment).
  • Page 7 WARNING Wrong assessment of impact forces may cause serious damage to people, animal and things. DEA System reminds all personnel that the installer must ascertain that these impact forces, measured according to EN 12445 prescriptions, are actually below the limits indicated by EN12453 regulation.

Table of Contents