Led Colour Indications; Spare Parts; Warranty; General Warranty Terms And Conditions - VENTILAIRSEC VMI PUREVENT Installation And Maintenance Manual

6.1.2 LED colour indications

The VMI® PUREVENT VISION'R appliance and the control unit have an indicator that changes colour
according to the operational status. If the colour changes from BLUE or flashes, refer to the table
below:
LED colour
Flashing blue
Yellow
Red
For any other problems, contact the technical department.

7 SPARE PARTS

Repair Description
Motor kit
Preheating kit
Electronic card kit
Fuse F1: type T250V12.5A

8 WARRANTY

8.1 General warranty terms and conditions

See the general terms and conditions of sale.
The system must be installed by a qualified professional technician using best practices and
complying with current standards and the stipulations in our instruction manuals. The system must
be used normally and serviced regularly by a specialist.

8.2 Warranty period

The VMI® PUREVENT VISION'R system and its control unit carries a 5-year warranty for parts and
labour (in our workshops).
All of the equipment (sensor, box) carries a 2-year warranty for parts and labour (in our workshops).
The warranty covering our products runs from the date of commissioning of the same, proven by the
provision of a warranty document.

8.3 Exclusion conditions

Any defect in the installation associated with failure to follow the manufacturer's recommendations,
failure to comply with any applicable standards and current legislation or with lack of servicing, will
be excluded from this warranty.
Information
The control unit batteries are flat.
The filter is clogged.
The machine has detected a fault.
Ref. No.
Motor plug-in
unit
Heater plug-in
unit
EL 225
Remedy
Change the batteries.
Change the filter.
Check the error code shown on
the control unit.
Contact the technical
department.
41