Spectral Output; Routine Maintenance And Trouble Shooting; Customer Support - Lumencor SPECTRA Light Engine Instruction Manual

4. Spectral Output

The spectra of the most commonly requested light engine outputs (colored bands) are shown below along with a 75W
Xenon trace (grey) and a 120W metal halide lamp output (brown). Other outputs are available upon request.
30
25
20
15
10
5
0
350 400

5. Routine Maintenance and Trouble Shooting

Remove any built-up dust or accumulation on the air intake ports. A vacuum may be used to remove debris so that a
steady supply of air is available for cooling. It is recommended that these dust-filters be cleaned by a gentle suction
device at least every 6 months and more often in dusty or smoke-filled environments.
There are no user-replaceable components or sub-assemblies in SPECTRA.

6. Customer Support

T: 503.505.6985
E: les.decker@lumencor.com
W: http://www.lumencor.com/support/software_control
M: Lumencor, Inc., 14964 NW Greenbrier Parkway, Beaverton, OR 97006 U.S.A.
SPECTRA, SPECTRA S and SPECTRA X Instruction Manual
450 500 550
Wavelength (nm)
600 650 700
10