Technical Data - Flymo Turbo Lite 350 Operator's Manual

The Flymo spare parts are available from your Flymo dealer
or from the Flymo service.
Only use an original Flymo blade:
Flymo Replacement Blade for TL350:
reference no. FLY008. Part no. 512733490.
Flymo Replacement Blade for TL400:
reference no. FLY048. Part no. 511864790.
Problem
Mower does not start
Engine is jammed and
makes a noise
Loud noises, the mower is rattling
Mower runs unevenly or
vibrates strongly
Lawn is not cleanly cut
NOTE: For any other malfunctions please contact the Husqvarna UK Ltd. Customer Service.
Repairs must only be done by Husqvarna UK Ltd. service departments or specialist dealers
approved by Flymo.

7. TECHNICAL DATA

Electric Lawnmower
Rated power
Mains voltage
Mains frequency
Speed of rotation cutting blade
Cutting width
Cutting height adjustment
Weight
Sound pressure level L
pA
Uncertainty k
pA
Sound power level L :
2)
WA
measured / guaranteed
Uncertainty k
WA
Possible Cause
Mains cable is disconnected or
damaged.
Blade is blocked.
Blade is blocked.
Cutting height is too low.
Screws on engine, its fixing or
on the mower housing are loose.
Blade is damaged or the blade
mounting is released.
Blade is very dirty.
Blade is blunt or damaged.
Cutting height is too low.
Unit Value
(TL350)
W 1400
V 230
Hz 50
R/min. 4100
cm 35
mm 15 – 41
kg 7.5
1) 83
dB (A)
1.5
93 / 96
dB (A)
1
v Replace the blade (see 3. OPERATION "To adjust the
cutting height").
Remedy
v Connect the mains cable or
if necessary replace it.
v Remove the obstacle.
v Remove the obstacle.
v Raise the cutting height.
v Have screws tightened by an
authorized specialist dealer or
the Flymo Service.
v Replace the blade.
v Clean the mower
(see 4. MAINTENANCE).
If this does not rectify the
problem, replace the blade.
v Replace the blade.
v Raise the cutting height.
Value
(TL400)
1500
230
50
4100
40
15 – 41
7.5
82
1.5
92 / 96
1
9