Service / Warranty; Technical Data - Flymo EasiGlide 300 Operator's Manual

Only use an original FLYMO blade:
FLYMO Replacement Blade for 30 cm:
Reference no. FLY094
FLYMO Replacement Blade for 33 cm:
Reference no. FLY095
FLYMO Replacement Blade for 36 cm:
Reference no. FLY096
v Replace the blade (see 3. OPERATION To adjust the cutting height).
Problem Possible Cause
Mower does not start Mains cable is disconnected
or damaged.
Motor is blocked.
Motor is jammed and Motor is blocked.
makes a noise
Cutting height is too low.
Loud noises, the mower Screws on motor, its fixing or
is rattling on the mower chasing are
loose.
Mower runs unevenly or Blade is damaged / worn or the
vibrates strongly blade mounting is released.
Blade is very dirty.
Poor grass collection Lid is not correct in place.
Airflow slots are dirty.
Not mowing in straight lines.
Lawn is not cleanly mowed Blade is blunt or damaged.
Cutting height is too low.
Poor flotation Underside of the mower is
dirty.
Cutting height is too low.
Fan is damaged.
If poor flotation persists, contact the local approved Service
Centre.
NOTE: For any other malfunctions please contact the FLYMO service depart-
ment. Repairs must only be done by FLYMO service departments or specialist
dealers approved by FLYMO.

7. TECHNICAL DATA

Electric Hover Lawnmower Unit
Rated power W
Mains voltage V
Mains frequency Hz
Speed of rotation cutting
R/min
blade
Cutting width cm
Cutting height adjustment
mm
(4 positions)
Volume of grass box l
Weight kg
Sound pressure level L
1)
dB (A)
pA
Uncertainty k
pA
Sound power level L :
2)
WA
measured / guaranteed
dB (A)
Uncertainty k
WA
Hand / arm vibration a
1)
m/s
2
vhw
Uncertainty k
vhw
Measuring process complying with:
NOTE: The stated vibration emission value has been measured according to
a standardised test procedure and can be used for comparison of one electric
power tool with another. It can also be used for preliminary evaluation of
exposure. The vibration emission value can vary during actual use of the electric power
tool.
EG300VUK-20.960.01.indd 7
Part no. 529370590
Part no. 529370790
Part no. 529370890
Remedy
v Connect the mains cable or
if necessary replace it.
v Remove the obstacle.
v Remove the obstacle.
v Raise the cutting height.
v Let the screws be tightened
by an authorised specialist
dealer.
v Replace the blade.
v Clean the mower
(see 4. MAINTENANCE).
If this does not rectify the
problem, replace the blade.
v Put the lid correct on the
grass box.
v Clean the mower
(see 4. MAINTENANCE).
v Mow in straight lines.
v Replace the blade.
v Raise the cutting height.
v Clean the underside of the
mower.
v Raise the cutting height.
v Check and replace the fan.
Value Value Value
(30 cm) (33 cm) (36 cm)
1700 1700 1800
230 230 230
50 50 50
4200 4200 4200
30 33 36
10 – 30 10 – 30 10 – 30
20 20 30
8.2 8.2 8.4
84 83 80
3 3 3
92 / 96 92 / 96 92 / 96
3.9 3.2 3.2
1.5 1.5 1.9
1.5 1.5 1.5
EN 60335-2-77 RL 2000/14/EC
1) 2)
Please consult the supply authority, if necessary, that the equipment is
connected only to a supply of an impedance no more than 0.354 Ω.
This maximum permissible system impedance at the interface point of
the user's supply is according to the test value of EasiGlide 360V.
8. ACCESSORIES
FLYMO Replacement As replacement for blunt blade.
Blade for 30 cm
FLYMO Replacement As replacement for blunt blade.
Blade for 33 cm
FLYMO Replacement As replacement for blunt blade.
Blade for 36 cm

9. SERVICE / WARRANTY

Service:
Please contact the address on the back page.
Warranty statement:
In the event of a warranty claim, no charge is levied to you for the services
provided.
FLYMO grants a warranty for all original FLYMO new products for two
years from the date of original purchase from the retailer, provided that
the devices have been for private use only. This manufacturer's warranty
does not apply to products acquired second hand. This warranty includes
all significant defects of the product that can be proved to be material or
manufacturing faults. This war ranty is fulfilled by supplying a fully functional
replacement product or by repairing the faulty product sent to us free of
charge; we reserve the right to choose between these options. This ser-
vice is subject to the following provisions:
• The product has been used for its intended purpose as per the recom-
mendations in the operating instructions.
• Neither the purchaser nor a third party has attempted to open or repair
the product.
• Only Original FLYMO replacement parts and wear parts have been used
for operation.
• Presentation of the receipt.
Normal wear and tear of parts and components (such as blades, blade
fixing parts, turbines, light bulbs, V-belts / toothed belts, impellers, air
filters, spark plugs), visual changes, wear parts and consumables are
excluded from the warranty.
This manufacturer's warranty is limited to replacement and repair of prod-
ucts in accordance with the abovementioned conditions. The manufac-
turer's warranty does not constitute an entitlement to lodge other claims
against us as a manufacturer, such as for damages. This manufacturer's
warranty does not, of course, affect statutory and contractual warranty
claims against the dealer / retailer.
The manufacturer's warranty is governed by the law of the Federal
Republic of Germany.
In case of a warranty claim, please return the faulty product, together with
a copy of the receipt and a description of the fault, with postage paid to
the service address.
Consumables:
The blade is a consumable and is not included in the warranty.
Reference no. FLY094
Part no. 529370590
Reference no. FLY095
Part no. 529370790
Reference no. FLY096
Part no. 529370890
7
07.10.20 13:20