Energy Efficiency - AEG BPK742320M User Manual

46 www.aeg.com
Problem
The food sensor does not
operate.
The display shows F111.
The display shows an error
code that is not in this table.
Steam and condensation
settle on the food and in the
cavity of the oven.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".
14.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

15. ENERGY EFFICIENCY

15.1 Energy saving
The oven has features which
help you save energy during
everyday cooking.
Possible cause
The plug of the food sensor
is not correctly installed into
the socket.
The plug of the food sensor
is not correctly installed into
the socket.
There is an electrical fault.
You left the dish in the oven
for too long.
The demo mode is activated. Refer to "Daily Use chapter,
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
.........................................
.........................................
.........................................
Make sure that the oven door is closed
when the oven operates. Do not open
the oven door too often during cooking.
Keep the door gasket clean and make
sure it is well fixed in its position.
Remedy
Put the plug of the food sen‐
sor as far as possible into
the socket.
Put the plug of the food sen‐
sor as far as possible into
the socket.
• Turn off the oven with the
house fuse or the safety
switch in the fuse box
and turn it on again.
• If the display shows the
error code again, contact
the Customer Care De‐
partment.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
Basic Settings.