AEG BPK742320M User Manual page 23

2. Press and
until the display shows a message .
To turn off the Child Lock function repeat
step 2.
11.3 Function Lock
This function prevents an accidental
change of the heating function. You can
turn it on only when the oven works.
1. Turn on the oven.
2. Set a heating function or setting.
3. Press again and again until the
display shows: Function Lock.
4. Press to confirm.
If the Pyrolysis function
works, the door is locked
and the symbol of a key
comes on in the display.
To turn off the function, press
display shows a message. Press
again and then to confirm.
When you turn off the oven,
the function also turns off.
11.4 Set + Go
The function lets you set a heating
function (or a programme) and use it
later with one press of any symbol.
1. Turn on the oven.
2. Set a heating function.
3. Press again and again until the
display shows: Duration.
4. Set the time.
5. Press again and again until the
display shows: Set + Go.
6. Press to confirm.
Press any symbol (except for
the function: Set + Go. The set heating
function starts.
When the heating function ends, a signal
sounds.
at the same time
. The
) to start
• Function Lock is on when
the heating function
works.
• The menu: Basic Settings
lets you turn the function:
Set + Go on and off.
11.5 Automatic switch-off
For safety reasons the oven turns off
after some time, if a heating function
works and you do not change any
settings.
(°C)
30 - 115
120 - 195
200 - 245
250 - maximum
The Automatic switch-off does not work
with the functions: Light, Food Sensor,
Duration, End Time.
11.6 Brightness of the display
There are two modes of display
brightness:
Day brightness
ENGLISH 23
(h)
12.5
8.5
5.5
3
Night bright‐
ness