Ec Declaration Of Conformity - Makita HM1802 Instruction Manual

Noise
The typical A-weighted noise level determined according
to EN60745:
Model HM1802
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model HM1812
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Model HM1802
Work mode: chiselling
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model HM1812
Work mode: chiselling
Vibration emission (a
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).

EC DECLARATION OF CONFORMITY

For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
): 95 dB (A)
pA
): 106 dB (A)
WA
): 96 dB (A)
pA
): 107 dB (A)
WA
value (tri-axial vector
): 14.0 m/s
2
h, CHeq
2
): 6.5 m/s
2
h, CHeq
2
ENG905-1
ENG900-1
sum)
ENG901-1
5