Performance/Safety Features - Kenmore BC7005 Use & Care Manual

Vacuum cleaner
Table of Contents

Advertisement

Available languages

Available languages

WARNING
Personal Injury Hazard
To avoid accidental brushroll starting,
always turn off and unplug the vacuum
cleaner before cleaning the brushroll area.
Failure to do so can result in personal
injury.
OVERLOAD PROTECTOR
The PowerMate
has built-in protection
®
against motor and belt damage should the
brushroll jam. If the brushroll slows down or
stops, the overload protector shuts off the
PowerMate
. The canister motor will continue
®
to run.
To correct problem: Turn off and unplug
vacuum cleaner, remove obstruction, then
press overload protector reset button.
If the problem persists, call 1-877-531-7321
(US) / 1-844-608-3081 (CA) for assistance.
ELECTRONIC SUCTION CONTROL
The electronic suction control allows you to
change the power of the vacuum cleaner
suction motor.
SUCTION
CONTROL
Increase
Suction
Decrease
Suction

PERFORMANCE/SAFETY FEATURES

Overload
Protector
Reset
Increase suction
for upholsteries
and carpets.
Decrease suction
for draperies and
lightweight rugs.
DIRT SENSOR
The dirt sensor is located on the floor brush.
When the vacuum cleaner is in use, with the
switch in the CARPET position, the blue light
on the top of the brush will illuminate to show
that dirt is being vacuumed. As long as the
light is on, dirt is passing across the sensor to
indicate that the surface still needs cleaning.
When the sensor light turns off, the sensor is
not seeing enough dirt to warrant further
cleaning of that area.
Dirt
Sensor
TO CLEAN DIRT SENSOR LENSES
The dirt sensor lenses are located on the
inside of the floor brush. These lenses should
be cleaned periodically.
1. Remove floor brush from nozzle.
2. Turn floor brush upside down.
3. The two dirt sensor lenses are located on
the inside of the opening as shown. Brush
each sensor lens several times to remove dust
and dirt.
CAUTION
Never use water or any cleaning solution
when cleaning the lenses. The residue of
the water or cleaners will accelerate the
recoating of the lenses and make cleaning
necessary sooner.
- 16 -
Dirt Sensor
Lenses

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents