Powermate ® Care - Kenmore BC7005 Use & Care Manual

Always follow all safety precautions when performing maintenance to the PowerMate
WARNING
Electrical Shock Or Personal Injury Hazard
Always turn off and unplug vacuum
cleaner before performing maintenance
to the vacuum cleaner. Failure to do so
could result in electrical shock or personal
injury from vacuum cleaner suddenly
starting.
BELT CHANGING AND BRUSHROLL CLEANING
TO REMOVE BELT
1. Remove floor
brush from the
PowerMate .
®
3. Turn PowerMate
®
right side up.
4. Loosen the rear
latches located
below the pedals.
POWERMATE
Brush
Release
Pedal
2. Turn PowerMate
upside down and
remove three (3)
screws.
5. Grasp cover
by rear and pull
up to remove it
from base.
CARE
®
6. Unscrew two (2)
brushroll cover
screws and remove
brushroll cover.
®
8. Check and clean end cap areas. See
BRUSHROLL ASSEMBLY (page 23) for
picture of complete brushroll assembly.
- 22 -
.
®
7. Lift brushroll
assembly out
and remove
worn belt.