Kenmore BC7005 Use & Care Manual page 13

CAUTION
DO NOT attach or remove handle or
wands while vacuum cleaner is ON. This
could cause sparking and damage the
electrical contacts or electronic controls.
ATTACHMENTS ON HANDLE
NOTE: If the PowerMate
vacuum cleaner off before removing handle
from wand.
1. Press wand release
button and pull up on
handle.
2. Slide attachments
firmly on handle as
needed. See
ATTACHMENT USE
TABLE (page 15).
Wand
Release
Pet
PowerMate ™
Fan
Tool
NOTE:
To remove Pet PowerMate
and/or Fan Tool, press the wand release
button and slide attachment out.
ATTACHMENTS
is attached, turn
®
Wand
Release
Handle
Crevice
Tool
Dusting
Brush
, Dusting Brush,
™
ATTACHMENTS ON WAND
1. To remove wand from
PowerMate ® , lock wand
in straight-up position.
2. Press wand release pedal with foot and
pull the wand straight up and out of
PowerMate .
®
Wand
Release
Pedal
3. Put attachments on wand as needed. All
except crevice tool will click into place.
See ATTACHMENT USE TABLE (page 15).
Tool
Release
Pet
PowerMate ™
Fan
Tool
NOTE:
To remove Pet PowerMate
and/or Fan Tool, press the tool release
button and slide attachment out.
- 13 -
Wand
Crevice
Tool
Dusting
Brush
, Dusting Brush,
™